|
INSPECTION REPORT DETAILS |
|
 |
ACCESSORIES:
Check Instrument panel gauge and lights operation, Horn operation, Audio System, Power antenna (if equipped), Climate control operation, Windshield wipers an washer front/rear operation, Window regulators and power motors operation, Electric rear window defroster operation, Lighter and powerpoint outlets (if equipped), Outside mirror controls, Power sunroof operation (If equipped), Power seat and doors operation (If equipped).
|
 |
ENGINE:
Check oil level, verify oil clarity and viscosity, Oil filter condition, Valve covers and head gaskets in good condition, Condition of engine belts, automatic belt tensioner, Timming in good condition, Condition of hose clamps and retainer clips
|
 |
ENGINE COOLANT: Check radiator for leaks or damage and water pump in good condition, ensure fan shroud is securely in place, Verify blades of cooling fans are not broken or bent, Coolant level and freeze protection rating.
|
 |
IGNITION SYSTEM: Inspect system for loose, cracked or burned wires. Check wire for short-circuits and arcing.
|
 |
FUEL SYSTEM: Inspect fuel injection system for proper operation, Inspect evaporative emissions system for proper operation, Check fuel system for leaks or loose wires and lines.
|
 |
ELECTRICAL SYSTEM: Inspect battery for cracks. Check battery top posts and cables condition, Measure battery voltage/conduct load test, Check alternator charging system, Check starter performance.
|
 |
AIR CONDITIONING & CLIMATE CONTROL: HVAC/Front and Rear Electronic Climate Control (if equipped), All climate control directional functions/vents working properly, Check compressor, and clutch condition, Check condenser and Air conditioning lines and hoses for leaks or damage.
|
 |
TRANSMISSION: Check fluid level meets manufacturer's specified level, clarity and viscosity, Check cooler condition (If equipped), Transmission gear engagement and shift points are smooth, Check for transmission mounts vibration and fluid leaks.
|
 |
DIFFERENTIAL: Check fluid level front/rear differential case meets manufacturer's specified level, clarity and viscosity.
|
 |
TRANSFER CASE (4x4): Check fluid level meets manufacturer's specified level, clarity and viscosity. Transfer case/skid plate structural condition.
|
 |
BRAKES & BRAKING SYSTEM: Locate and inspect master-cylinder reservoir, check brake fluid level, verify clarity and condition, check booster operation, brake pads/shoes have 40% of usable material remaining, brake rotor/drum surfaces, parking brake operation, brakes lines and hoses condition, anti-lock braking system sensors wires (ABS).
|
 |
STEERING: Inspect power steering fluid level, Inspect structural condition of all steering system elements, Steering gear box, rack and pinion, Bellows boots, Tie rods inner/outer, Idler arm, Power steering cooler.
|
 |
SUSPENSION: Check wheel bearings front and rear, Control arms, Ball joints and bushing lower/upper, stabilizer bar and bushing.
|
 |
CONSTANT VELOCITY JOINTS: Check protection bellows of constant velocity joints exempts from cracks and damages, driving shaft condition.
|
 |
ENGINE RUNNING - NOISE, VIBRATION & LEAKS: Check for fluid leaks or valvetrain noise, Vacuum system condition, Fuel delivery system, Valve cover/cylinder head/exhaust manifold gasket soundness, Radiator/heater hoses condition, Power steering pump/hose condition, No squeaking belts.
|
 |
MOUNTS & BUSHINGS: Inspect all engine and transmission mounts, front and rear suspension grommets and bushings, links, sway bar and mounts.
|
 |
MUFFLERS & EXHAUST SYSTEM: Inspect exhaust manifolds, catalytic converter, oxygen sensor, muffler, protector (screens-heat), pipes and attaching parts.
|
 |
VEHICLE TEST DRIVE:
Shift/Transmission Interlock (Automatic Transmission), Transmission operation and Transfer Case (4x4) (If equipped), Engine driveability performance, Brake operation and Power assisted braking system is functional, Anti-lock brake system warning/self-test light is functional, Anti-lock brake system functional (if equipped), Vehicle tracks straight under hard braking conditions, Noise and vibration of suspension, drivetrain front and rear, Cornering ability, Cruise Control (If equipped).
|
|
In order to make it even more convenient for you, to provide the best Service for your vehicle, you may now make your service appointment request right now by using our easy On-line Service Appointment. One of our team members will confirm your request as soon as possible to schedule a convenient time for your appointment.
If you wish, you may also contact our Customer Service at (450) 681-1414. |
|
|
|
WHAT OUR CERTIFIED TECHNICIANS DO… |
|
|
Our trained technicians will comb the vehicle for approximately one hours looking for any mechanical, safety, structural, and cosmetic flaws. This is basically a thorough bumper-to-bumper visual inspection of the entire vehicle.
A Scanner analysis and check-up for all on-board computers and controls modules to detect any faulty codes present or history.
The vehicle will also be road tested for overall drivability. When finished, a detailed report will give an explanation of the true condition of the vehicle and future work required. The following items/systems will be inspected for the actual condition and/or apparent integrity. |
|
|
|
|
|
|